 |
Inspiration |
|
|
|
|
|
|
Information |
|
|
|
|
|
|
 |
Home >
Products >
Hand Tools >
Snips, Shears & Seamers >
Beverly Shear >
Pneumatic Shears
|
|
| |
|
|
Beverly Pneumatic Shears
|
|
|
Beverly Pneumatic Shears have all the advantages of the Beverly hand-operated throatless shears, plus fast, effortless cutting action through air cylinder operation. Air operation speeds up work, permits more accurate cutting to a pattern or template as the operator can now concentrate on guiding the work through the shear with both hands. It is activated by a 115 volt 60 Cycle AC (unless otherwise requested), with a minimum of 105 PSI air pressure at rated capabilities per unit.
|
|
 |
Model PBB3
The PBB3 Pneumatic Shear uses the standard Model B-3 frame and adds the convinence of an air cylinder. Weighing aproxamitly 115 lbs, with a capacity of up to 3/16" mild steel or 10 gauge stainless.
- More Info -
|
|
|
|
Model B-3
The PB-3 Pneumatic Shear uses the standard Model B-3 frame and adds the convinence of an air cylinder. Weighing aproxamitly 125 lbs, with a capacity of up to 3/16" mild steel or 10 gauge stainless.
- More Info -
|
|
|
|
Model PB-6
The PB-6 Pneumatic Shearis the largest of all the throatless shears. It uses the standard Model B-3 frame and adds the convinence of an air cylinder. Weighing aproxamitly 155 lbs, with a capacity of up to 5/16" mild steel or 1/4" stainless. There is not much this will not cut
- More Info -
|
|
|
 |
Beverly Shear Floor Stand
The Beverly Shear Floor Stand was developed to meet the need for a rigid base that would occupy as little floor space as possible and bring any Beverly Shear to the most efficient operating position.
- More Info -
|
|
|
|
| |
|
|
|
|
