Instructional DVDs on Welding

Home > Products > Instructional Metalworking DVDs > Instructional DVDs on Welding - by TM Technologies

4130 Chromemoly Airframe Construction (2 DVD set)

Three EAA Technical Counselors (over 60 total years' experience) show you the procedures necessary to construct a complete airframe from plans. Table jig construction, measuring, cutting, fitting, bending, tacking, and gas welding are shown in detail. - More Info -

4130 Chromemoly Airframe Construction (2 DVD set)
TMV-0009-D	$65.00
7 Day Rental - 2 DVDs
TMV-0009-R	$16.40

Aluminum Welding Methods (ALCOA)

This film details gas welding with both hydrogen and acetylene, and then covers stick welding, carbon arc, atomic hydrogen, and spot welding. Shows proper preheat and postheat methods for heavy sections, and proper edge beveling and gapping also. - More Info -

Aluminum Welding Methods (ALCOA)
HTV-0017-D	$25.00
7 Day Rental
HTV-0017-R	$6.40

Cast Iron Welding with the Torch & Arc DVD

Using traditional materials and proven, simple methods, Kent shows you a nearly perfect system to repair exhaust manifolds, pump housings, valve bodies, and some blocks. - More Info -

Cast Iron Welding with the Torch & Arc
TMV-0012-D	$35.00
7 Day Rental - DVD
TMV-0012-R	$9.40

Gas Welding Aluminum

Oxy-acetylene torch welding is covered in depth, starting with bottle safety, regulator pressure settings, and torch adjustment for different material thicknesses from .040" to .063". - More Info -

Gas Welding Aluminum
TMV-0001-D	$35.00
7 Day Rental - DVD
TMV-0001-R	$9.40

Gas Welding Aluminum 2.1, “The Difficult” (2 DVD set)

In that first film I deliberately avoided the higher-strength alloys along with brazing and soldering. I wanted to keep that film short and to a specific point: teaching people to gas weld aluminum and with a minimum of fuss. Now, after these ensuing years, it is time to delve into the more complex aspects of this science/art. - More Info -