TM Radius Bending Air Hammer Dies
Home > Products > Forming Machines > Power Hammers > TM Air Power Hammers > Dies > Radius Bending Air Hammer Dies for TM Technologies Air Power Hammers
If you are constructing tanks, rocker panels, or hood panels you will eventually be confronted with the need to make radius bends. Our machine makes very clean, even radius bends on polished sheet from .025″ to .080″ aluminum and 24- to 18-gauge mild steel. Our dies make from 1/4″ to 6″ radii, depending on the dies and methods used.
| RADIUS BENDING COMBINATIONS – Dies, Motors & Metals | |||
| LOWER DIE | Use with UPPER DIE | For these metal thicknesses | with Motors |
| Straight-Steel | Upper Female Radius Die | .063˝ to soft .125˝ alum./copper | #3, 4, 5 |
| .035˝ to .075˝ mild steel | #2, 3, 4, 5 | ||
| Rubber Head | .015˝ to .090˝ aluminum/copper | #2, 3, 4, 5 | |
| .015˝ to .040˝ mild steel | #2, 3 | ||
| Leather Roughing Head | .015˝ to .125˝ aluminum/copper | #2, 3, 4, 5 | |
| .015˝ to .075˝ mild steel | #2, 3, 4, 5 | ||
| Curved-Steel | Rubber Head | .015˝ to .090˝ aluminum/copper | #2, 3, 4, 5 |
| .015˝ to .040˝ mild steel | #2, 3, 4, 5 | ||
| .015˝ to .090˝ aluminum/copper | #2, 3, 4, 5 | ||
| Leather Roughing Head | .015˝ to .075˝ mild steel | #2, 3, 4, 5 | |
| Polymer Chisel | Rubber Head | .015˝ to .050˝ aluminum/copper | #2, 3 |
| (.063˝ if dead soft) | #3 | ||
| Large Polymer | Rubber Head | .015˝ to .050˝ aluminum/copper | #2, 3, 4, 5 |
| .015˝ to .030˝ mild steel | #2, 3, 4, 5 | ||
| Leather Roughing Head | .015˝ to .063˝ aluminum/copper | #2, 3, 4, 5 | |
| .015˝ to .050˝ mild steel | #2, 3, 4, 5 | ||
| Large Steel Upper Hammer | .015˝ to .075˝ aluminum/copper | #2, 3, 4, 5 | |
| .015˝ to .065˝ mild steel | #2, 3, 4, 5 | ||
