4130 & Steel DVDs
4130 Chromemoly Airframe Construction (2 DVD set)
Three EAA Technical Counselors (over 60 total years' experience) show you the procedures necessary to construct a complete airframe from plans. Table jig construction, measuring, cutting, fitting, bending, tacking, and gas welding are shown in detail.
4130 Chromemoly Airframe Construction (2 DVD set) |
 |
||
| TMV-0009-D | $65.00 | ||
7 Day Rental - 2 DVDs |
|
||
| TMV-0009-R | $16.40 | ||
| |
|||
Air Hammer Operations
This new film introduces the craftsman to the many shaping and planishing operations the Air Shaping and Planishing Hammer performs on a variety of metal alloys, thicknesses and hardnesses.
Air Hammer Operations |
|
||
| TMV-0187-D | $20.00 | ||
7 Day Rental - DVD |
|
||
| TMV-0187-R | $9.40 | ||
| |
|||
Autobody Steel Patch Panels
No machinery here--just common hand tools and a welder (torch or electric). The first part shows how to fit the 'one size fits all' patch panel into an early Ford door. The second part shows how to form complex patches on your own to repair a '34 Ford grille by hammering and butt welding.
Autobody Steel Patch Panels |
|
||
| TMV-0010-D | $35.00 | ||
7 Day Rental - DVD |
|
||
| TMV-0010-R | $9.40 | ||
| |
|||
Fender Arches
Be a fly on the wall as two metal guys, Richard Ufheil and Kent White, "The Tin Man", go after a pair of 1935 Packard front fenders needing fender (or wheel) arch replacement.
Fender Arches |
|
||
| TMV-0011-D | $60.00 | ||
7 Day Rental - DVD |
|
||
| TMV-0011-R | $9.40 | ||
| |
|||
Repairing Structural Tubing
This class teaches measuring, geometry, straightening, cutting fishmouths, fitting, splicing, and welding to repair some fuselage damage. A fine companion to our full-length 2-DVD series, 4130 Chromemoly Airframe Construction.
Note: You may purchase this video as part of the 3-DVD set, Aircraft Structural Tubing Video Set (3 DVDs). This set includes the 2-DVD series, 4130 Chromemoly Airframe Construction.
Repairing Structural Tubing |
|
||
| HTV-0016-D | $40.00 | ||
7 Day Rental |
|
||
| HTV-0016-R | $6.40 | ||
| |
|||
The Art & Science of Autobody Soldering
A thorough investigation of autobody "leadwork" covering basic chemistry & metallurgy, application techniques, and solutions for common problems.
The Art & Science of Autobody Soldering |
|
||
| TMV-0013-D | $40.00 | ||
7 Day Rental - DVD |
|
||
| TMV-0013-R | $9.40 | ||
| |
|||
Aircraft Structural Tubing DVD Set (3 DVDs)
3 DVD Set Includes:
-4130 Chromemoly Airframe Construction (2 DVD set)
-Repairing Structural Tubing
Aircraft Structural Tubing DVD Set |
|
||
| KTS-0186-D | $85.00 | ||
| |
|||
An Introduction to Steel Work DVD set
If you are just starting out and wish to have a good overview, Kent has chosen these DVDs specifically for you. It is difficult in the beginning of learning a skill, so you need some inspiration and careful instruction, both to keep your interest and to feed your curiosity. Our price savings helps, too.
4 DVD Set Includes:
-Shrinking Magic
-Autobody Steel Patch Panels
-Fender Arches
-Repairing Structural Tubing
These 4 DVDs cover hand tools, measuring, cutting, forming, form blocks, patterns, shrinking, stretching, Pullmax, Air Hammer, gas welding and spot welding, too. Kent says if these DVDs had been available back in 1970, he would have learned a heck of a lot faster, saved a a lot of learning curve time and would have had fewer wasted efforts on mistakes!
An Introduction to Steel Work DVD set |
|
||
| KTS-0181-D | $105.00 | ||
| |
|||